This item is not available any more. Some components might no longer be manufactured or there is an improved successor model.
CMPS10 - Tilt Compensated Magnetic Compass
The CMPS10 module is a tilt compensated compass. Employing a 3-axis magnetometer and a 3-axis accelerometer and a powerful 16-bit processor, the CMPS10 has been designed to remove the errors caused by tilting of the PCB. The CMPS10 produces a result of 0-3599 representing 0-359.9 or 0 to 255. The output of the three sensors measuring x, y and z components of the magnetic field, together with the pitch and roll are used to calculate the bearing, each of these components are also made available in there raw form. The CMPS10 module requires a power supply at 3.3 - 5v and draws a nominal 25mA of current. There are three ways of getting the bearing from the module. A serial interface, an I2C interface or a PWM output.
For data on each mode please click the mode heading. Note the CMPS10 looks at the mode selection pins at power-up only.
|I2C mode||Serial mode||PWM mode|
|To enter the I2C mode of operation leave
the mode pin unconnected
|To enter the serial mode of operation
connect the mode pin to ground
|To enter the PWM mode of operation
connect the select PWM pin to ground
The Factory use pin is for our internal testing only, this pin should
Data update frequency
Updates of the tilt compensated heading occur at 75hz with the data is filtered by means of a 45 sample buffer, this means a complete refresh of the buffer is achieved every 640ms. Raw data from the magnetometer and accelerometer is available every 13.3ms.
PCB Drilling Plan
The following diagram shows the CMPS10 PCB mounting hole positions.
Newest specification: 11/2014
plus EUR 5.95 shipping costs
Prices incl. VATEUR 3.34
plus EUR 5.00 shipping costs
Prices excl. VAT
Article no.: DEV-4-SPLIT-MOLEX
Suitable accessory for
Product information for: CMPS10 - Tilt Compensated Magnetic Compass
Publishing date (date of last technical specification): 2011-07-20
Shipping weight: 160 g
Brand: ROBOT ELECTRONICS
Article number: DEV-CMPS10
Manufacturer's part number: CMPS10