Request for quotation

Phone +49 941 46297290
Fax +49 941 46297299
E-Mail: mail@manu-systems.com
Contact form

Availability

Not in stock. We will obtain the article for you.

Estimated manufacturer's time of delivery: 45 days
updated: 27.11.2018

RMP 440 SE

Segway

Reliable

The RMP 440 SE leverages all of the redundant safety features of the Segway® Personal Transporter (PT). The motor controllers and brushless DC drive motors are each fully redundant, allowing component failures to be handled smoothly and safely.

Five lithium-ion batteries provide a run time of ~8 hours of operation or ~24 hours in standby. To charge the batteries, simply connect the charger cable.

Enclosure

The RMP 440 SE’s small enclosure provides 2 channels of DC power (12 V and 24 V default) and can be placed anywhere along the mounting rails (front, rear or in the middle). Simply locate it where it won’t interfere with other equipment on top of the RMP.


Rugged

The RMP 440 SE can operate indoors and out in a wide range of weather conditions and over a variety of terrains. It is designed to meet IP66/NEMA 4 standards and all its military grade bulkhead connectors are rated for Severe Wind and Moisture Problem (SWAMP) areas. It can wade through water up to 250mm (standard configuration) or 400mm (inverted gearboxes), operate in temperatures of 0-50° C and traverse slopes up to 30°.


Powerful

With a maximum velocity of 8.0 m/s (18 mph) and a peak torque of 100 Nm per wheel, the RMP 440 SE is capable of moving incredibly fast. This means there’s plenty of head room to perform flawlessly with payloads up to 90 kg (200 lbs). In situations where turn-in-place capability is not required, it can carry payloads up to 180 kg (400 lbs).


One Interface, Many Mobility Platforms

Segway’s entire line of RMPs share a single communications structure. This makes it easy to change mobility platforms, even at a late stage in development. If your requirements change you don’t have to worry about rewriting your control software; simply swap one RMP for another and keep going.


Accessories

Article NumberDescription
RMP-2294300001100W @ 5V, DC-DC converter with auxiliary power module interface PCB
RMP-2294300002150W @ 12V, DC-DC converter with auxiliary power module interface PCB
RMP-2294300003150W @ 24V, DC-DC converter with auxiliary power module interface PCB
RMP-2294300004150W @ 48V, DC-DC converter with auxiliary power module interface PCB
RMP-2331700002Mountable Gearbox Spacer, 2 Chassis, Inverted. Increases ground clearance by 15cm. (Standard equipment on RMP440 SE. Optional equipment on RMP440 LE)

Download

Drawings
Technical Specifications

Product information for: RMP 440 SE

Publishing date (date of last technical specification): 2014-02-01
Length: 1.1 m
Width: 842 mm
Height: 607 mm
Weight: 106.6 kg
Shipping weight: 190 kg
Manufacturer: SEGWAY
Brand: SEGWAY RMP
Article number: RMP-2337200001
Manufacturer's part number: 2337200001

The article RMP 440 SE is listed in the following categories:

Robot platforms > Medium

SUMMIT XL Heavy Load with rubber wheels RBK-SUMMIT-XL-HL-RUB

SUMMIT XL Heavy Load with rubber wheels

from Robotnik
Newest specification: 02/2014
Request for quotation


Article no.: RBK-SUMMIT-XL-HL-RUB
More details...
SUMMIT XL with rubber wheels RBK-SUMMIT-XL-RUB

SUMMIT XL with rubber wheels

from Robotnik
Newest specification: 02/2014
Request for quotation


Article no.: RBK-SUMMIT-XL-RUB
More details...
P1 Platform Outdoor - Design and development project WOR-0022

P1 Platform Outdoor - Design and development project

from WORLD OF ROBOTS
Newest specification: 07/2015
Request for quotation


Article no.: WOR-0022
More details...
RMP 210 RMP-2335200001

RMP 210

from SEGWAY RMP
Newest specification: 02/2014
Request for quotation


Article no.: RMP-2335200001
More details...
RMP 220 RMP-2335100001

RMP 220

from SEGWAY RMP
Newest specification: 02/2014
Request for quotation


Article no.: RMP-2335100001
More details...
RMP 440 Flex-Omni RMP-2358300001

RMP 440 Flex-Omni

from SEGWAY RMP
Newest specification: 02/2014
Request for quotation


Article no.: RMP-2358300001
More details...
RMP 440 LE RMP-2316100001

RMP 440 LE

from SEGWAY RMP
Newest specification: 08/2012
Request for quotation


Article no.: RMP-2316100001
More details...
RMP 440 SE RMP-2337200001

RMP 440 SE

from SEGWAY RMP
Newest specification: 02/2014
Request for quotation


Article no.: RMP-2337200001
More details...
SUMMIT XL Heavy Load Omni with Mecanum wheels RBK-SUMMIT-XL-HL-OMNI

SUMMIT XL Heavy Load Omni with Mecanum wheels

from Robotnik
Newest specification: 02/2014
Request for quotation


Article no.: RBK-SUMMIT-XL-HL-OMNI
More details...
SUMMIT XL Omni with Mecanum wheels RBK-SUMMIT-XL-OMNI

SUMMIT XL Omni with Mecanum wheels

from Robotnik
Newest specification: 03/2014
Request for quotation


Article no.: RBK-SUMMIT-XL-OMNI
More details...

Contact us

* These fields are mandatory.

Request for quotation

Phone +49 941 46297290
Fax +49 941 46297299
E-Mail: mail@manu-systems.com
Contact form

Availability

Not in stock. We will obtain the article for you.

Estimated manufacturer's time of delivery: 45 days
updated: 27.11.2018

Share

About SEGWAY RMP

Segway® Robotics, the world leader in mobile robot platforms. Segway RMP (Robotic Mobility Platform) products offer unmatched versatility, durability, and performance. Designed for easy integration by scientists and engineers, Segway ground robot platforms are the ideal starting point for applications including research and development, industrial automation, security, and defense. Segway engineers have led the way with electric drive propulsion systems including battery management, advanced sensing, drive-by-wire control, and dynamic stabilization. Segway RMP users benefit from some of the same proprietary technology that has been deployed and proven around the world as part of Segway's PT (Personal Transporter) line of products.

More from SEGWAY RMP